Machine for double laminating extrusion

This system for double laminating extrusion, working with PE or PP resin coating, can laminate with these base rolls, such as BOPP film, PET film, foil, non-woven fabrics, paper, etc. The finished products are PE + BOPP film, PE + PET film, PE foil, PE non-woven fabric, PE paper, which are widely used in the field of flexible packaging, such as packaging for medicines, food packaging, packaging office tools, packaging architecture and so forth.

Characteristics

gives

Machine for double laminating extrusion

1. A three-roll machine for film lamination, is equipped with an adjustable main mold. The automatic load feeder works with a drying system. The plastic extruder adopts a frequency motor to adjust the velocidade.
2. The part of the heating screw, adopts a system of automatic control of temperature, it is heated by the cooled ceramic heater ar.
3. The lamination roller adopts a double internal water cooling system, which ensures the lamination film with good quality and high-speed operation with long prazo.
4. The first feeding station adopts a frequency motor for automatic voltage control and an automatic control system for posição.
5. The second feeding station adopts a magnetic powder brake, and a tower type exchange device dual-estação.
6. A double side treatment is adopted to make sure the quality laminação.
7. A trim cutting device utilizes a negative pressure fan, which can store material after esmagamento.
8. Rewinding and unwinding machine has the self-adjusting voltage function and dosing automatic counting, which allows stable operation with high speed and high rolling qualidade.
9. This extrusion lamination machine is controlled by PLC, has fully automatic operating characteristics, high speed, even surface lamination, high compliance, winding level etc.
10. It is a new laminating machine with more advanced design and technology. Compared with the traditional laminating machine, adhesive coating system and the heating system of the oven are not required. Our machine for double laminating extrusion, simplifies the structure and the production process, reduces energy consumption, is easy to operate and environmentally friendly.

technical parameters

gives

Machine for double laminating extrusion

model	JDGLM-1000
Diameter of the main screw	100mm
smaller diameter screw	70mm
L / D	33: 1
Width	1000mm
lamination thickness	0.01-0.1mm
max. the line	180m / min
production	300kg / h
main engine power	55kw
lower power of main engine	30kw
Total power	175kw
weight	15t
Overall dimension (L × W × H) mm	10m × 90m × 3.6m
Power supply	380/3/4/50 (Volt / Ph / Line / Hz)